Sunday 14 May 2017

Upgrade your planet: add rings!

This is the first on two or three posts on adding rings to Furaha, or any other fictional planet. The reason to add any is simple: rings add drama! Ron Miller, an excellent artist specialising in astronomical illustration, provided fascinating examples of how dramatic rings can look by transplanting Saturn's rings to Earth. He has shown and discussed the results a few years ago on this io9 page (the comments are also interesting).
 
Click to enlarge; copyright Ron Miller (used with permission)
Here is one of his examples, showing a view from Guatemala. Impressive, isn't it? Somehow I only started wondering whether rings would look just as good on Furaha a short while ago. I certainly studied rings before, in the context of the planet Ilo, as can be seen from this post and this one.
Click to enlarge; copyright Gert van Dijk
The animation above shows the planet Ilo and was taken from the main Furaha site (under the 'astronomy/seasons' tab. It shows how the shape of the areas lit by the sun changes over a year; the curved horizontal band is the ring shadow.

Adding rings to a view as expertly as Mr Miller did is not a simple matter of drawing some curves in the sky. Once you start thinking about the problem, you will realise that their aspect depends on how large they are, but also on where you are on the planet, on the direction your 'camera' is pointing in, and finally on the 'lens' you are using, by which I mean the visual angle. And as if that is not enough, the lighting of the rings differs for every hour and day of the year. Some places on the surface will be in the shadow of the rings, and at other times the planet will cast a huge shadow on the otherwise sunlit rings.    

So I started exploring these matters. I am not certain I will actually add rings to Furaha, but it is fun to explore. In this post I will start with basic ring astronomy (mind you, the only astronomy I can deal with is of a very basic variety). Planetary rings consist of many pieces of ice or rock, from boulders to dust particles, all circling a planet in its equatorial plane, and only there. There can be no rings directly overhead on the poles. In Earth's solar system, rings usually do not form one continuous band from the inner to the outer radius, but are divided into several distinct ringlets with gaps in between. These are apparently the effect of moons that sweep clean parts of the rings through their own gravitational effects. While there must be strict Newtonian rules underlying where these ringlets and gaps are placed, the large variety of ring shapes in our own solar system suggests that there is wiggle room here, allowing some creativity on the wordbuilder's side. Just compare the rings of the gas planets, for which this Wikipedia article is a good start.

click to enlarge; copyright:  http://astronomy.nju.edu.cn
The image above can be found at this website; it compares the various ring systems and stresses another important feature: rings are always situated inside a planet's Roche limit, or 'tide limit'. The word 'tide' here has nothing to do with seas, but concerns 'tidal forces' acting on a piece of ice or rock coming close to a large mass (a planet or sun). The gravitational forces act differently on the parts of an object closest and farthest away from the planet. These tidal forces will break up an object if it is within a certain distance of the planet, and that distance is the Roche limit. The breaking of the object, say an asteroid, goes on until the remnants are small enough to stay whole. If you start this process with a large enough object, the resulting pieces may collide with one another, breaking off more pieces, adding to the fun. The Wikipedia page on Roche's limit shows very clearly what happens to a heavenly body when it crosses the limit, and also contains a formula to calculate how far out from a planet the limit lies (this is the formula for 'fluid' objects).

distance= 2.44 * radiusP * (densityPlanet /densityAsteroid)^1/3

The distance is in km, and is governed by the planet's radius (radiusP, in km) and on a fraction, involving the density of the planet divided by that of an asteroid coming near the planet. If you wish to express the Roche limit in units of the planetary radius, you can just leave RadiusP out. If the asteroid has the same density as the planet, the fraction is one, and then the formula simply reads: 'The Roche limit is at 2.44 planetary radii'. But asteroids are probably less dense than a terrestrial planet, making the fraction greater than 1, so the Roche limit will be further out. I found estimates for various types of asteroids ranging from 2 to 5 gram per cubic centimeter, and the density of Furaha is 5.9 gram per cubic cm (the Furaha planetary system was kindly worked out by Martyn Fogg). So we can take the Roche limit for Furaha up to 3.5 radii.

Click to enlarge; copyright Gert van Dijk
Here is a ring of which the outer margin is exactly 3.5 planetary radii away from the centre of the planet. The planet is shown at the point in its orbit where the northern pole points directly towards the sun (the summer solstice). The glowing orange arrow show the direction of sunlight, and the thin lines show the plane of the orbit (and the direction perpedicular to it). The rings are 50% transparanet. You can see the shadow of the planet on the rings, and you can just also see the shadow of the rings on the planet.

That ring seems overly large, so I will set for a safer maximum value for the outer radius of the ring at 2.5 radii out from the centre of Furaha. But what should the value for the inner radius be? That is less clear; the outer parts of the atmosphere would form an effective limit, but I do not think I want the rings to come that close: bits and pieces might rain down continuously, and if these are large enough they will mess up the biosphere. So let's start with a fairly narrow ring with an inner radius of 1.8 to 2.0 radii.

click to enlarge; copyright Gert van Dijk
So here we are; that looks better. I also adjusted the transparency of the rings: this one is 67% transparent. How much light should the the rings let through? If the density of rocks in the rings is high and the rings are thick, not much light will come through. The reason this matters is because the rings casts shadows on the daylight side of the planet. They do so on the Northern or Southern hemisphere depending on the time of year.

click to enlarge; copyright Gert van Dijk
Here is a simple scheme explaining that. Furaha's axis is tilted by 18.3 degrees, and so are the rings. When it is summer in the Northern hemisphere (at the left), the North pole is tilted towards the sun, and the shadow of the rings falls on the Southern hemisphere. When it is winter in the Northern hemisphere (at the right) the ring shadow darkens the Northern hemisphere. I do not want these shadows to be big and black, because that will have large and unpredictable effects on the climate, the weather and the life forms (well, I certainly cannot predict them, and that is the actual limiting factor). So I prefer narrow transparent rings: I still get drama without too many unknown problems. I will assume that a small asteroid, breaking up and filling a large area, would result in largely transparent rings. In fact, it is the other way around: the rings are about two thirds transparent, because the asteroid forming the rings contained exactly the right amount of matter to make it so.

The final matter is the composition of the rings; they can theoretically be made of ice or of rocks. I doubt ice would last long this close to the sun, so the rings are made of rock. Earth's moon consists of  very dark rock, and yet its appears bright enough in the night sky to have inspired generations of poets; that seems a suitable unit of measurement for drama. Let's therefore assume that the putative Furaha ring system is made of dark rock.

So far we have the main features of the ring system in place, based on science, as it should be, but with a fair amount of handwavium. I am not certain about whether I should give up on Furaha's two tiny moons. Ideally, I should calculate appropriate gaps in the rings, but admit that at present I do not have the knowledge to do so. Any readers who can do so are friendly invited to comment on the matter!

Click to enlarge; copyright Gert van Dijk
This image shows Furaha with some fancy rings, for even more drama. The inner one is nearly completely transparent.  Another step in deciding whether or not I should add rings to Furaha may be to calculate the effects of this particular ring system on the lighting of the planetary surface. But, having done so once for Ilo, I already have a fairly good idea of what the effects for Furaha will be.

click to enlarge; copyright Gert van Dijk
This is another image of the same fancy rings, now from a lower point of view that lets you see the Southern hemisphere with the ring shadows. These shadows do not look too bad. Now that we have reasonable options to design rings, it is time to take the next step: what do the rings look like from any point on the surface of the planet, for any point in time of the year? That will require another post...                          

7 comments:

Zerraspace said...

Correlating moons with ring formation is quite complex; even a cursory look at Saturn confirms this. On the one hand, all the gaps in its rings are caused either by minor shepherd moons clearing out debris from directly within the gaps (Pan for the Encke gap, Daphnis for the Keeler gap) or from right outside them (Janus/Epimetheus maintain the outer edge of the A ring, Prometheus maintains the inner edge of the F ring, etc), or from orbital resonance with farther out moons (Mimas and Titan seem particularly influential). On the other, some moons also provide material which creates rings about them – the Janus/Epimetheus ring from Janus and Epimetheus, the G ring from Aegaeon, the Methone ring from Methone, the Anthe ring from Anthe, the Pallene ring from Pallene, the E ring from Enceladus, and the Phoebe ring from Phoebe.

As such, it would be difficult to give a definite answer on exactly how your two moons would contribute. This depends partially on how small they are. If they are quite tiny (pebbles with good press, as I like to call them, like Mars’ moons), they most likely do not have the gravitational influence to affect the rings unless they are very close (even by orbital resonance), and so long as the rings are within the Roche limit, they could not shepherd from directly within the rings because they’d have just broken up and become more ring material. In this case, I wouldn’t expect any gaps, just a very smooth disc.

This would be different if the rings are outside the Roche limit (it’s possible, Saturn’s are outside its own Roche limit), in which case you could instead have the ring being produced from material being blasted off the moon. However, in this case, the rings would be extremely sparse, almost transparent. This is the case even around Saturn – those “moon-made” rings mentioned above are barely visible next to the much more magnificent inner rings.

If you had a somewhat larger moon, disruptive orbital resonance becomes a major influence. From what I’ve observed, 7:6, 2:1, 7:3, 5:2 and 3:1 and are disruptive resonances. That is to say that the orbital period of that part of the ring must be that ratio the orbital period of the moon; this causes them to repeat relative motions so the less massive ring gets regularly pulled in one direction by the moon, clearing out that location. How large is large? Of the “small” moons that do this around Saturn, Epimetheus is 5.3e17 kg in mass, Janus is 1.9e18 kg in mass, and Mimas is 3.75e19 kg in mass. These are around super-massive Saturn, and while being closer in to the less massive Furaha will make up for a lot of that, it still gives you a place to start from. Seeing as you're working with rocky rather than icy bodies, the Furahan equivalents should end up a good bit smaller for the same effect.

Keavan said...

Correct me if I'm wrong, but wouldn't lowering the opacity of the rings lower the drama, and therefore defeat the purpose for having them in the first place?

Sigmund Nastrazzurro said...

Zerraspace: thank you very much for these pointers! The first conclusion I derived from your answer are that it seems I can get away with a smooth ring if I delete the two small moons. That is not a great loss; they were so small that they shine much eless brightly than earth's moon, and as such they do not provide much drama. The second conclusion that i will probably have to undestand more about ring physics myself...

Keavan: transparent rings will definitely reduce the drama element, but probably not all that much. ThThe rings will still shine in the night sky, less bright than the moon per visual angle, but the total apparent surface is so much larger that there will be sufficient drama left!

Zerraspace said...

Sigmund Nastrazzurro: Yes, the rings should be smooth if there are no moons to interfere. If you want to keep the moons and have smooth rings, they should be small and far out. Titan influences Saturn’s rings nearly throughout despite being four times further out than our moon and pretty far out from most of the material, but it’s also one of the biggest moons of the solar system; the other moons are generally pretty close to the ring they’re affecting.

Regarding orbital resonances, resonance occurs when the orbital period of one body is a whole fraction (division of integers) of the orbital period of another. Now, the square of period is directly proportional to the cube of orbital radius, so the former grows faster than the latter. With that in mind, if 3:1 is the highest destructive resonance (what I’m finding suggests 4:1 is a more likely number), then you’d probably be in the clear if the closest moon is at least three (four) times further out than the farthest extent of the ring.

If they’re closer, or you do want gaps in said rings, we're going to need some more numbers (specifically, how wide the rings are and where you want the gaps; alternatively, where you want the moons).

Sabersonic said...

An interesting idea for your world, though you may have to consider the longevity of said ring system around Furaha even if it's from an asteroid.

I'll just leave this video link here.

Artefexian: If Earth had Rings Worldbuilding,

Sigmund Nastrazzurro said...

Zerraspace: thans again. I really will have to dive into the astronomy books. Oh well...

Sabersonic: True; but they would be fun while they last. I had seen that video; it is well-made.

Anonymous said...
This comment has been removed by a blog administrator.